产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
杭州挤出注塑机边称重式混料机 GW-450 重量式混合機(じゅうりょうしきこんごうき)

杭州挤出注塑机边称重式混料机 GW-450 重量式混合機(じゅうりょうしきこんごうき)
GW-450 for Injection Machine Side
在日本注塑机边上,用称重式混料机,很实际的收益不在精度数字,而在换料换色后能多快回到稳定。
On injection machine side the practical gain is not a headline percentage but how fast the line returns to a steady state after a material or colour change.
术语对照 / Terminology
| 中文 | English | 本地语言 / Local |
|---|---|---|
| 称重式混料机 | Gravimetric Blender | 重量式混合機(じゅうりょうしきこんごうき) |
| 批量称重混料机 | Gravimetric Batch Blender | 重量式混合機(じゅうりょうしきこんごうき) (batch) |
| 失重式混料机 | Loss-in-Weight Blender | 重量式混合機(じゅうりょうしきこんごうき) (LIW) |
| 多组份配料 | Multi-Component Dosing | 重量式混合機(じゅうりょうしきこんごうき) (multi) |
市场与定位 / Market & Positioning
机边小批量配色要快换配方,批量小、换色勤,机器得能存配方而不是每次重设。 日本客户对噪声、粉尘与外观细节要求高,说明书要日文,设备表面处理与走线整齐度常被现场检查。
Machine-side colouring needs fast recipe change on small lots, so the unit must store recipes rather than be reset each time. Japanese buyers weigh noise, dust and finish, expecting Japanese manuals and tidy wiring and surface treatment on site inspection.
结构组成 / Construction
机架做加强处理,满斗不下垂;称重底座加减振垫,地面振动不会被放大成流量噪声;控制柜与称重部分分开布置,减少电磁干扰。
The frame is braced against full hoppers, the weighing base sits on isolation pads so floor vibration does not become flow noise, and the cabinet is separated from the weighing section.
计量与精度 / Metering & Accuracy
称重结算不受回料堆密度变化影响,这是称重式与体积式的根本区别;体积式在回料掺比高时比例会越跑越偏。
Weight-based settlement ignores regrind bulk density, the essential difference from volumetric units that drift as reclaim share rises.
电气与安装 / Electrical & Installation
电气制式按目的国定制:200V/50 或 60Hz 三相,另可 400V;出口按海运木箱包装,箱内加减振垫与防潮袋,起运港与主要目的港为横滨、神户、大阪。
Electrical build follows the destination: 200V three phase at 50 or 60Hz, with 400V on request. Export packing uses a wooden case with isolation pads and moisture barrier, shipped to Yokohama, Kobe, Osaka.
参数速览 / Specifications
型号 GW-450|组份 4 组(可扩 6)|单批 2~30 kg|产量 10~300 kg/h|料斗 25~50 升|驱动 步进电机 4 台|控制 触控屏 配方号调用
Model GW-450 | 4 components expandable to 6, 2-30 kg batch, 10-300 kg/h, 25-50 litre hoppers, four stepper drives
适配场景 / Applications
注塑机边的配比与配色;也用于回收料按比例掺入、色母低比例添加、功能母粒微量计量。
Proportioning and colouring on injection machine side, also regrind blending, low-share masterbatch and functional additive metering.
常见问题 / FAQ
Q:噪声能控制到多少?
Q: What noise level is achievable?
A:常规运行约 70 分贝以内,加隔声罩与减振垫可再降。
Around 70 dB in normal running, lower with an acoustic cover and isolation pads.
Q:200V 三相能做吗?
Q: Is 200V three phase possible?
A:可以,日本常用 200V 三相,控制柜与电机按当地规范选型。
Yes, 200V three phase is standard there, with cabinet and motors selected to local codes.
相关产品 / Related Products
- 东莞称重式混料机 GW-600 Gravimetric Blender 术语对照
- 广州 Gravimetric Batch Blender 批量称重混料
- 宁波 Loss-in-Weight Blender 失重式混料
- 3D打印耗材挤出整线 TPD-1200
- 产品分类总览 / All Product Categories
