产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

潍坊挤出型材与异型材线称重式混料机 GW-600 重量式混合機(じゅうりょうしきこんごうき)

日期:2026-11-19 10:55
浏览次数:6
摘要:潍坊型材与异型材线称重式混料机 GW-600,面向日本客户,当地写法为 重量式混合機(じゅうりょうしきこんごうき);型材与异型材线,组份 4~6 组,产量 8~300 kg/h。 / GW-600 gravimetric blender for profile and window lines buyers, 4~6 组 components and 8~300 kg/h output.

称重式混料机 整机

潍坊挤出型材与异型材线称重式混料机 GW-600 重量式混合機(じゅうりょうしきこんごうき)
GW-600 for Profile

在日本型材与异型材线上,用称重式混料机,很实际的收益不在精度数字,而在换料换色后能多快回到稳定。
On profile and window lines the practical gain is not a headline percentage but how fast the line returns to a steady state after a material or colour change.

术语对照 / Terminology

中文English本地语言 / Local
称重式混料机Gravimetric Blender重量式混合機(じゅうりょうしきこんごうき)
批量称重混料机Gravimetric Batch Blender重量式混合機(じゅうりょうしきこんごうき) (batch)
失重式混料机Loss-in-Weight Blender重量式混合機(じゅうりょうしきこんごうき) (LIW)
多组份配料Multi-Component Dosing重量式混合機(じゅうりょうしきこんごうき) (multi)

市场与定位 / Market & Positioning

型材断面复杂,各组分到达机头的时间差会在断面颜色上体现,混料座必须短程高效。 日本客户对噪声、粉尘与外观细节要求高,说明书要日文,设备表面处理与走线整齐度常被现场检查。
Complex profiles expose arrival timing as colour bands across the section, so the mixing seat must blend over a short path. Japanese buyers weigh noise, dust and finish, expecting Japanese manuals and tidy wiring and surface treatment on site inspection.

结构组成 / Construction

料斗分体快拆,换料清斗不拆整机;每斗带砝码放置位可现场校零点;混料座与出料口内壁做防粘处理,浅色料换色时残料影响小。
Hoppers remove quickly for cleaning, each carries a test-weight position for on-site zeroing, and non-stick surfaces on seat and outlet limit residue on pale shades.

计量与精度 / Metering & Accuracy

每组独立驱动,流量按克数设定而不是按转速百分比;换配方时输入比例,控制器自行换算,操作工不必记转速。
Independent drives set flow in grams rather than speed percentage, and a recipe entry in ratios lets the controller work out the speeds so operators need not memorise them.

电气与安装 / Electrical & Installation

电气制式按目的国定制:200V/50 或 60Hz 三相,另可 400V;出口按海运木箱包装,箱内加减振垫与防潮袋,起运港与主要目的港为横滨、神户、大阪。
Electrical build follows the destination: 200V three phase at 50 or 60Hz, with 400V on request. Export packing uses a wooden case with isolation pads and moisture barrier, shipped to Yokohama, Kobe, Osaka.

参数速览 / Specifications

型号 GW-600|组份 4~6 组|单批 2~50 kg|产量 8~300 kg/h|料斗 25~60 升|驱动 步进电机 4~6 台|控制 触控屏 配方存储与批次记录
Model GW-600 | 4-6 components, 2-50 kg batch, 8-300 kg/h, 25-60 litre hoppers, recipe memory and batch log

适配场景 / Applications

型材与异型材线的配比与配色;也用于回收料按比例掺入、色母低比例添加、功能母粒微量计量。
Proportioning and colouring on profile and window lines, also regrind blending, low-share masterbatch and functional additive metering.

常见问题 / FAQ

Q:噪声能控制到多少?
Q: What noise level is achievable?
A:常规运行约 70 分贝以内,加隔声罩与减振垫可再降。
Around 70 dB in normal running, lower with an acoustic cover and isolation pads.

Q:200V 三相能做吗?
Q: Is 200V three phase possible?
A:可以,日本常用 200V 三相,控制柜与电机按当地规范选型。
Yes, 200V three phase is standard there, with cabinet and motors selected to local codes.

相关产品 / Related Products

粤公网安备 44190002002288号