产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
宁波失重式混料机 GWM-300 Loss-in-Weight Blender|连续计量供料

宁波失重式混料机 GWM-300 Loss-in-Weight Blender|连续计量供料
Loss-in-Weight Blender GWM-300
失重式靠「斗在变轻」来算流量:每秒掉多少克就是产能,掉了就补,补的瞬间是很容易出偏差的一段。
Loss-in-weight derives flow from a hopper getting lighter, grams per second becoming throughput, and the refill instant is where deviation lives.
术语对照 / Terminology in Export Markets
| 中文 | English | Español | Русский | Tiếng Việt |
|---|---|---|---|---|
| 失重式混料机 | Loss-in-Weight Blender / LIW Blender | Mezclador por pérdida de peso | Смеситель по убыли веса | Máy trộn giảm trọng |
| 连续计量 | Continuous Metering | Dosificación continua | Непрерывное дозирование | Định lượng liên tục |
| 补料瞬间 | Refill Moment | Momento de recarga | Момент дозаправки | Thời điểm cấp liệu |
| 克每秒 | Gram per Second | Gramo por segundo | Грамм в секунду | Gam trên giây |
适用范围 / Where It Fits
单组或两组串联,料斗悬挂在称重传感器上,螺杆按失重速率调整转速;适合单一配方长时间连续跑。
One or two loops in series hang on load cells while screws follow the weight-loss rate, suited to one recipe running continuously for long periods.
结构组成 / Construction
垂直搅拌与水平搅拌分置,防止架桥;螺杆配减速机,低速端转速稳定;称重底座带减振,地面振动会被放大成流量噪声。
Vertical and horizontal stirrers prevent bridging, the screw runs through a gearbox for stable low speed, and the weighing base is isolated since floor vibration becomes flow noise.
计量与精度 / Metering & Accuracy
流量以克每秒与公斤每小时双单位显示,偏差常见 0.1% 量级;补料时切容积模式是色差与线径波动的常见来源。
Flow reads in grams per second and kg per hour with deviation commonly near 0.1 percent, and switching to volumetric mode during refill is a common source of colour shift.
安装与调试 / Installation & Commissioning
安装找平后先做静态零点,再跑动态标定:抽一段料称重比对,误差超限先查减振与风扰,再查螺杆磨损。
Level the frame, zero statically, then calibrate dynamically by catching a timed sample; if deviation exceeds the limit, check isolation and draught before screw wear.
参数速览 / Specifications
型号 GWM-300|流量 0.5~300 kg/h|单组偏差 约 0.1%|料斗 30~200 升|驱动 伺服配减速机|可选 RS485 与以太网
Model GWM-300 | 0.5-300 kg/h | About 0.1 percent per loop | 30-200 litre hoppers | Servo with gearbox | RS485 and Ethernet optional
应用场景 / Applications
单色高产量挤出线、功能母粒微量连续添加、回收料按比例连续掺入、片材与薄膜线的稳定配比。
High-output single-colour extrusion, continuous micro addition of functional masterbatch, regrind proportioning, and steady dosing on sheet and film lines.
外贸问答 / Export FAQ
Q:失重式要不要配混料?
Q: Does a LIW unit need mixing?
A:单组只计量不混合;多组时出料汇到混料座再混,否则各组到达挤出机的时间差会形成周期性色差。
A single loop only meters; with several loops the streams must meet in a mixing seat, otherwise arrival timing differences create periodic colour shift.
Q:产量突然掉一截怎么查?
Q: What causes a sudden drop in output?
A:先看补料是否卡料、料斗是否架桥,再看螺杆是否磨损;流量曲线出现锯齿多为补料切换造成。
Check for refill stalls and bridging first, then screw wear; a jagged flow curve usually follows refill switching.
询盘需要提供 / What to Send in an Enquiry
给出以下五项即可报价:组份数、单批重量或小时产量、原料形态(粒料/破碎料/粉料)、线径或制品规格、电气制式与目的地港口。
Five items close a quotation: number of components, batch weight or hourly output, material form, product size or line diameter, and electrical standard with destination port.
相关产品 / Related Products
- 东莞称重式混料机 GW-600 外贸术语对照
- 广州 Gravity Blender 重力式批量混料
- 宁波 Loss-in-Weight Blender 失重式混料
- 3D打印耗材挤出整线 TPD-1200
- 产品分类总览 / All Product Categories
