产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

结晶机 Crystallizer|PET/TPU/PLA 原料结晶预处理设备

日期:2026-11-21 00:52
浏览次数:44
摘要:一、产品概述 | Product Overview 中文:结晶机(Crystallizer)安装在干燥工序之前,作用是把无定形状态的塑料颗粒或瓶片加热到结晶温度区间,让分子链重排形成结晶区,颗粒表面由黏变硬。 English: The crystallizer is installed before

一、产品概述 | Product Overview

PET 结晶干燥机 PET Crystallizer


中文:结晶机(Crystallizer)安装在干燥工序之前,作用是把无定形状态的塑料颗粒或瓶片加热到结晶温度区间,让分子链重排形成结晶区,颗粒表面由黏变硬。


English: The crystallizer is installed before the drying stage. It heats amorphous pellets or flakes into the crystallization temperature range so molecular chains rearrange into crystalline regions and the surface hardens.


中文:这一道工序解决的是「干燥结块」的根因:无定形料在玻璃化温度以上会软化粘连,直接进干燥料斗就会结成大块、堵料、干燥不均。


English: This step removes the root cause of caking in the dryer: amorphous resin softens above its glass transition temperature, and feeding it straight into a drying hopper produces blocks, blockage and uneven drying.


二、工作原理 | Working Principle


中文:原料由计量喂料进入结晶罐 → 热风与搅拌共同作用,料温升到设定区间(PET 约 160~180℃、PLA 约 100~120℃、TPU 按牌号设定)→ 保温停留一段时间使结晶度上升 → 出料进入干燥料斗或直接进入主机。


English: Material is metered into the crystallizing vessel → hot air plus agitation raise the temperature into the set band (about 160–180 °C for PET, 100–120 °C for PLA, grade-specific for TPU) → a dwell period raises crystallinity → material discharges into the drying hopper or directly to the machine.


中文:控制要点:料温均匀性、停留时间、搅拌转速、排气,四项共同决定结晶效果。


English: Control essentials: temperature uniformity, dwell time, agitator speed and venting, which together decide the crystallization result.


三、核心优势 | Key Advantages


中文:结晶度可控,杜绝干燥结块与堵料

English: Controllable crystallinity eliminates caking and blockage in the dryer


中文:预处理独立成段,可与既有干燥机对接改造

English: A standalone pre-treatment stage that can be retrofitted to existing dryers


中文:保温与搅拌结构,料层温度均匀,避免局部过热

English: Insulated agitated design keeps the bed uniform and prevents local overheating


中文:PLC 按料温与停留时间联动,批次参数可记录

English: PLC interlocks temperature and dwell time, with loggable batch parameters


中文:出料可直连干燥料斗或中央供料,流程连续

English: Discharge connects directly to a drying hopper or central feeding for a continuous flow


四、与结晶除湿一体机的区别 | Crystallizer vs Combination Unit


中文:结晶机:只做结晶预处理,后面接独立干燥机,适合既有产线改造、产能分段扩展。


English: A standalone crystallizer only pre-treats, feeding a separate dryer; it suits retrofits and staged capacity expansion.


中文:结晶除湿一体机:结晶段与低露点干燥段集成在一台设备上,占地小、热损失少,适合新建整线。


English: A combination unit integrates crystallizing and low-dew-point drying on one skid with a smaller footprint and less heat loss, suiting new complete lines.


五、适用行业 | Application


中文:PET 瓶片与片材边料再生、PLA 餐具与膜材、TPU 线缆与薄膜、PET 瓶胚、涤纶短纤、改性造粒。


English: Recycled PET flakes and sheet trimmings, PLA tableware and film, TPU cable and film, PET preform, polyester staple fiber, compounding.


六、选型要点 | Selection Guide


中文:按产能选罐体容积与加热功率,按物料选搅拌形式(桨式适合瓶片、螺旋适合颗粒),按现场选落地式或机边式。


English: Size vessel volume and heating power by throughput, choose the agitator type by material (paddle for flakes, screw for pellets), and pick floor-standing or machine-side mounting by site layout.

相关产品 / Related Products

相关阅读 / Related Reading

粤公网安备 44190002002288号