产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
Gravimetric Mixer – Weighing Type Blender|增重式称重混料机
一、产品概述 | Product Overview

中文:Gravimetric Mixer(Weighing Type Blender,增重式称重混料机)采用重量法逐组分计量:每一组分先称到目标重量再投入混合仓,整批混合后卸料至下游主机,替代按体积估算的容积式混料机。
English: Gravimetric Mixer (Weighing Type Blender) doses each component by weight: every ingredient is weighed to its target before dropping into the mixing chamber, and the whole batch is discharged to the downstream machine. It replaces volumetric blenders that estimate by volume.
中文:适用原料:新料、回料(破碎料)、色母粒、功能助剂、填充母料,2~6 组分可选。
English: Applicable materials: virgin pellets, regrind, color masterbatch, functional additives and fillers, in 2 to 6 components.
二、工作原理 | Working Principle
中文:PLC 调用配方 → 各料斗按顺序向称重仓投料 → 称重传感器实时采集,达到目标重量即截料 → 全部组分称完落入搅拌仓 → 定时混合后自动卸料 → 记录本批实际重量并修正下一批。
English: The PLC recalls the recipe → hoppers feed sequentially into the weigh bin → load cells monitor in real time and cut off at target weight → after all components are weighed, material drops into the mixing chamber → timed blending and automatic discharge → actual batch weight is logged to correct the next batch.
中文:控制要点:单批重量、组分顺序、点动补料、振动补偿与落差补偿,四项决定实际精度。
English: Control essentials: batch size, component sequence, jog feeding, vibration and in-flight compensation, the four factors that decide real accuracy.
三、核心优势 | Key Advantages
中文:重量法计量,配比参考精度 ±0.1%~±0.5%
English: Weight-based dosing with reference accuracy ±0.1 %–±0.5 %
中文:不受颗粒密度、湿度、形状变化影响,色差与克重稳定
English: Unaffected by pellet density, humidity or shape variation, keeping color and gram weight stable
中文:换配方即换批,过渡料少,适合多牌号小批量
English: Recipe change at the next batch with little transition material, ideal for multi-grade small lots
中文:每批一条记录,可按批追溯与出具报表
English: One record per batch for traceability and reporting
中文:接触物料部位不锈钢,快拆搅拌仓,换色清洗方便
English: Stainless steel contact parts and quick-release mixing chamber for easy color changeover
四、适用行业 | Application
中文:注塑(多色多料)、挤出与吹膜、管材与片材、改性造粒、无纺布、3D 打印耗材、医用塑胶。
English: Injection with multi-color multi-material, extrusion and blown film, pipe and sheet, compounding, nonwoven, 3D printing filament, medical plastics.
五、选型要点 | Selection Guide
中文:按单批重量选机型:单批 200~2000 kg 属标准机型,更大单批需加大称重仓与搅拌功率。
English: Select by batch size: 200–2000 kg per batch is the standard range; larger batches need a bigger weigh bin and mixing power.
中文:按组分数量选料斗:2/3/4 组分较为常见,5~6 组分用于填充与功能母料同时添加。
English: Select hoppers by component count: 2/3/4 components are common; 5–6 components suit simultaneous filler and functional masterbatch dosing.
中文:按安装位置选结构:机边立式适合注塑机,落地式带输送适合挤出与集中供料。
English: Select by installation: machine-mounted vertical units suit injection machines; floor-standing units with conveying suit extrusion and central feeding.
六、与相近设备区分 | How It Differs
中文:Gravimetric Mixer 指整批称重混合;Loss-in-Weight Feeder 指连续单组分失重喂料;Volumetric Blender 指容积式估算配比,精度受物料状态影响。
English: A Gravimetric Mixer doses a whole batch by weight; a Loss-in-Weight Feeder doses one component continuously; a Volumetric Blender estimates by volume and its accuracy depends on material condition.
相关产品 / Related Products
相关阅读 / Related Reading
- 称重混料与多组份配比 精度、节拍与配方切换 Gravimetric Blending Accuracy Cycle Time and Recipe Change
- Gravimetric Blender for Injection Molding 注塑机边称重混料机 TGB-2
- Multi-component Gravimetric Blender 多组份称重混料机 TGB-6
- Gravimetric Blender for Pipe & Profile 管材型材称重混料机 TGB-4
