产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

PET Mixing Crystallizer PET搅拌结晶机 T3000J

日期:2026-11-20 10:09
浏览次数:27
摘要:PET Mixing Crystallizer PET搅拌结晶机 T3000J PET Mixing Crystallizer T3000J PET Mixing Crystallizer PET搅拌结晶机 T3000J:搅动加热让切片在罐内持续翻动,结晶均匀、不粘连,出料直接进干燥料斗。 PET

PET搅拌结晶机 整机 纯白底图

PET Mixing Crystallizer PET搅拌结晶机 T3000J
PET Mixing Crystallizer T3000J

PET Mixing Crystallizer PET搅拌结晶机 T3000J:搅动加热让切片在罐内持续翻动,结晶均匀、不粘连,出料直接进干燥料斗。
PET Mixing Crystallizer T3000J: Stirred heating keeps chips moving so crystallisation stays even and free of lumps, ready for the drying hopper.

设备说明 / Equipment Overview

PET 切片直接升温干燥容易粘连结块,先做搅拌结晶把软化点提上来,后续除湿干燥与输送才顺畅。
Heating chips straight into drying makes them lump, so stirred crystallisation raises the softening point first.

英文常写作 PET Crystallizer 或 Mixing Crystallizer,与 Crystallizer & Dryer 一体机的区别在于结晶与干燥是否分两段控温。
Written as PET crystallizer or mixing crystallizer; against a combined crystalliser-dryer, the difference is whether crystallising and drying hold separate temperature stages.

结构与控制 / Structure & Control

T3000J 罐内搅拌轴变频调速,热风从罐底送入循环,切片持续翻动、避免局部过热;出料温度可控。
The T3000J drives a variable-speed shaft while hot air enters at the base and circulates, so chips keep turning and no hot spot forms; outlet temperature is controlled.

运行与精度 / Performance & Accuracy

按料位与温度双条件控制,批次结束给出提示;可与除湿干燥机、中央供料按顺序联动,结晶—干燥—输送一条线走通。
Level and temperature jointly control the batch with an end signal, and it interlocks with dryer and conveying for one continuous line.

操作与维护 / Operation & Maintenance

搅拌轴与罐体按物料磨蚀性选材,密封件耐温;再生切片含粉多时前置筛分,减少罐内积料。
Shaft and vessel materials follow abrasiveness, seals are heat-rated, and screening ahead keeps powder out when regrind is dusty.

参数速览 / Specifications

型号 T3000J|单批 300~3000 kg|加热 电加热配热风循环|搅拌 变频调速|控制 温度与料位联动
Model T3000J | 300-3000 kg per batch | Electric heating with air circulation | Variable-speed stirring | Interlocked control

应用场景 / Applications

瓶坯与片材级 PET 前处理、再生切片造粒前结晶、纺丝级切片预处理、PLA 与工程塑料改性前配料。
Bottle and sheet grade PET pre-treatment, crystallising before reclaim pelletising, spinning-grade preparation and compounding.

再生切片含水与粉末都高,结晶段温度往上取一档、批量往小取,出料更均匀。
Reclaimed chips carry more moisture and fines, so take one step higher on crystallising temperature and a smaller batch for even output.

命名与叫法 / Naming Note

英文资料中同机多名的现象普遍,选型以流量、精度与料性为准;中文侧叫法随行业而异,以参数表对照即可。
Several English names exist for one machine; choose by flow, accuracy and material. Chinese naming varies by industry, so compare parameter tables.

选型与交付 / Sizing & Delivery

提供物料清单、单班产量与料性后出具选型计算书,确认配置与产能;签约后按约定交期发运,到场安装、联动调试与操作培训,随机附中英文手册与备件清单。
Send the material list, output per shift and material behaviour and we return a sizing sheet; after order we ship on schedule, install, commission and train, with bilingual manual and spare list.

常见问题 / FAQ

Q:结晶和干燥能不能一步做?
Q: Can crystallising and drying be one step?
A:多数 PET 工艺要先结晶再除湿干燥;合并做容易结块,再生料含水高时更明显。
Most processes crystallise first, then dry; combining them invites lumping, especially with wet regrind.

Q:搅拌转速怎么定?
Q: How is the stirring speed set?
A:按切片规格与批量定:过低翻动不足会局部过热,过高增加粉末与磨损,建议按实际料试一次再定。
Set by chip size and batch: too slow overheats locally, too fast adds fines; fix it after one trial.

当地 本地配套与选型提示 / Local Notes for 当地

当地塑料加工以注塑与挤出为主,组份数量与称量范围按实际料号与回料比例确定。
Local industry sets the material mix in 当地, so sizing follows the material mix and the regrind share rather than a fixed catalogue figure; the component count and weighing range are quoted against the actual job.

对应机型与配置见站内产品页:PET 片材低速搅拌结晶机。
Model and configuration: PET 片材低速搅拌结晶机.

相关产品 / Related Products

相关阅读 / Related Reading

PET结晶干燥系统

粤公网安备 44190002002288号