产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

沈阳管材与管件线挤出称重式混料机 GW-600|Pipe Gravimetric Blender

日期:2026-11-20 21:30
浏览次数:8
摘要:沈阳管材与管件线用称重式混料机 GW-600,组份 4~6 组,单批 2~50 kg,产量 8~300 kg/h;按重量逐组称量后再混,配比不随回料堆密度漂移。 / GW-600 on pipe and fitting lines, 4~6 组 components, 2~50 kg batch and 8~300 kg/h output, weighing each group before mixing.

称重式混料机 整机

沈阳管材与管件线挤出称重式混料机 GW-600|Pipe Gravimetric Blender
Gravimetric Blender GW-600 for Pipe And Fitting Lines

管材与管件线用GW-600 这条线很怕的是配比漂了没人发现:颜色慢慢偏、厚薄慢慢变,等到成品抽检才发现,已经废了一批。
The risk on pipe and fitting lines is a drifting blend nobody notices until a sample fails, with a whole batch already made.

术语对照 / Terminology

中文English本地语言 / Local
称重式混料机Gravimetric BlenderGravimetric Blender
批量称重混料机Gravimetric Batch BlenderBatch Blender
失重式混料机Loss-in-Weight BlenderLIW Blender
多组份配料Multi-Component DosingMulti-Component Dosing

市场与定位 / Market & Positioning

管材看壁厚与外径,配比里碳酸钙与回料的比例变化会让熔体黏度漂,壁厚随之偏。
Pipe wall and diameter follow viscosity, and shifting calcium carbonate or regrind shares drifts melt viscosity with the wall thickness.

结构组成 / Construction

机架做加强处理,满斗不下垂;称重底座加减振垫,地面振动不会被放大成流量噪声;控制柜与称重部分分开布置,减少电磁干扰。
The frame is braced against full hoppers, the weighing base sits on isolation pads so floor vibration does not become flow noise, and the cabinet is separated from the weighing section.

计量与精度 / Metering & Accuracy

称重结算不受回料堆密度变化影响,这是称重式与体积式的根本区别;体积式在回料掺比高时比例会越跑越偏。
Weight-based settlement ignores regrind bulk density, the essential difference from volumetric units that drift as reclaim share rises.

电气与安装 / Electrical & Installation

装在挤出机进料口正上方,出料口与进料口中心对齐;机架调平后加减振垫,通电前空跑校零,再用实物砝码逐斗复核。
Mounted directly above the throat with centres aligned, levelled on isolation pads, zeroed empty and checked per hopper with test weights.

参数速览 / Specifications

型号 GW-600|组份 4~6 组|单批 2~50 kg|产量 8~300 kg/h|料斗 25~60 升|驱动 步进电机 4~6 台|控制 触控屏 配方存储与批次记录
Model GW-600 | 4-6 components, 2-50 kg batch, 8-300 kg/h, 25-60 litre hoppers, recipe memory and batch log

适配场景 / Applications

适配 管材与管件线;也可用于来料批次掺混、再生料与新料配比、机边小批量打样。
Suited to pipe and fitting lines, also incoming batch blending, virgin and regrind proportioning and machine-side sampling.

常见问题 / FAQ

Q:这台在管材与管件线上要配多少组?
Q: How many components for pipe and fitting lines?
A:按配方里有几种料定:单一配比 3 组够,含回料与两种助剂就上 5 至 6 组,扩产不必换机。
Count the materials in the recipe: three loops for a simple blend, five or six with regrind and two additives, avoiding a later replacement.

Q:换配方要多久?
Q: How long is a recipe change?
A:存过配方的直接调号,一分钟内开始称量;全新配方输入比例即可,不必重设转速。
A stored recipe recalls in under a minute, and a new one needs only ratios rather than speed settings.

相关产品 / Related Products

称重式混料机

粤公网安备 44190002002288号