产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

苏州注塑机边挤出称重式混料机 GW-300|Injection Machine Side Gravimetric Blender

日期:2026-11-21 02:57
浏览次数:6
摘要:苏州注塑机边用称重式混料机 GW-300,组份 3~4 组,单批 1~20 kg,产量 5~150 kg/h;按重量逐组称量后再混,配比不随回料堆密度漂移。 / GW-300 on injection machine side, 3~4 组 components, 1~20 kg batch and 5~150 kg/h output, weighing each group before mixing.

称重式混料机 整机

苏州注塑机边挤出称重式混料机 GW-300|Injection Machine Side Gravimetric Blender
Gravimetric Blender GW-300 for Injection Machine Side

注塑机边用GW-300 这条线很怕的是配比漂了没人发现:颜色慢慢偏、厚薄慢慢变,等到成品抽检才发现,已经废了一批。
The risk on injection machine side is a drifting blend nobody notices until a sample fails, with a whole batch already made.

术语对照 / Terminology

中文English本地语言 / Local
称重式混料机Gravimetric BlenderGravimetric Blender
批量称重混料机Gravimetric Batch BlenderBatch Blender
失重式混料机Loss-in-Weight BlenderLIW Blender
多组份配料Multi-Component DosingMulti-Component Dosing

市场与定位 / Market & Positioning

机边小批量配色要快换配方,批量小、换色勤,机器得能存配方而不是每次重设。
Machine-side colouring needs fast recipe change on small lots, so the unit must store recipes rather than be reset each time.

结构组成 / Construction

料斗分体快拆,换料清斗不拆整机;每斗带砝码放置位可现场校零点;混料座与出料口内壁做防粘处理,浅色料换色时残料影响小。
Hoppers remove quickly for cleaning, each carries a test-weight position for on-site zeroing, and non-stick surfaces on seat and outlet limit residue on pale shades.

计量与精度 / Metering & Accuracy

每组独立驱动,流量按克数设定而不是按转速百分比;换配方时输入比例,控制器自行换算,操作工不必记转速。
Independent drives set flow in grams rather than speed percentage, and a recipe entry in ratios lets the controller work out the speeds so operators need not memorise them.

电气与安装 / Electrical & Installation

装在挤出机进料口正上方,出料口与进料口中心对齐;机架调平后加减振垫,通电前空跑校零,再用实物砝码逐斗复核。
Mounted directly above the throat with centres aligned, levelled on isolation pads, zeroed empty and checked per hopper with test weights.

参数速览 / Specifications

型号 GW-300|组份 3~4 组|单批 1~20 kg|产量 5~150 kg/h|料斗 15~40 升|驱动 步进与直流调速|控制 触控屏 配方 20 组
Model GW-300 | 3-4 components, 1-20 kg batch, 5-150 kg/h, 15-40 litre hoppers, stepper and DC drives, 20 recipes

适配场景 / Applications

适配 注塑机边;也可用于来料批次掺混、再生料与新料配比、机边小批量打样。
Suited to injection machine side, also incoming batch blending, virgin and regrind proportioning and machine-side sampling.

常见问题 / FAQ

Q:这台在注塑机边上要配多少组?
Q: How many components for injection machine side?
A:按配方里有几种料定:单一配比 3 组够,含回料与两种助剂就上 5 至 6 组,扩产不必换机。
Count the materials in the recipe: three loops for a simple blend, five or six with regrind and two additives, avoiding a later replacement.

Q:换配方要多久?
Q: How long is a recipe change?
A:存过配方的直接调号,一分钟内开始称量;全新配方输入比例即可,不必重设转速。
A stored recipe recalls in under a minute, and a new one needs only ratios rather than speed settings.

相关产品 / Related Products

粤公网安备 44190002002288号