产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

天津挤出注塑机边称重式混料机 GW-450 Mesin pencampur gravimetri / Pencampur berbasis berat

日期:2026-11-21 06:51
浏览次数:15
摘要:天津注塑机边称重式混料机 GW-450,面向印尼客户,当地写法为 Mesin pencampur gravimetri / Pencampur berbasis berat;注塑机边,组份 4 组(可扩 6),产量 10~300 kg/h。 / GW-450 gravimetric blender for injection machine side buyers, 4 组 components and 10~300 kg/h output.

称重式混料机 整机

天津挤出注塑机边称重式混料机 GW-450 Mesin pencampur gravimetri / Pencampur berbasis berat
GW-450 for Injection Machine Side

在印尼注塑机边上,用称重式混料机,很实际的收益不在精度数字,而在换料换色后能多快回到稳定。
On injection machine side the practical gain is not a headline percentage but how fast the line returns to a steady state after a material or colour change.

术语对照 / Terminology

中文English本地语言 / Local
称重式混料机Gravimetric BlenderMesin pencampur gravimetri / Pencampur berbasis berat
批量称重混料机Gravimetric Batch BlenderMesin pencampur gravimetri (batch)
失重式混料机Loss-in-Weight BlenderMesin pencampur gravimetri (LIW)
多组份配料Multi-Component DosingMesin pencampur gravimetri (multi)

市场与定位 / Market & Positioning

机边小批量配色要快换配方,批量小、换色勤,机器得能存配方而不是每次重设。 印尼客户对小产量单机需求多,常先买一台试用再扩线,机器要能单机独立运行、后期可并线。
Machine-side colouring needs fast recipe change on small lots, so the unit must store recipes rather than be reset each time. Indonesian buyers start with one unit and expand later, so the machine must run standalone and join a line afterwards.

结构组成 / Construction

机架做加强处理,满斗不下垂;称重底座加减振垫,地面振动不会被放大成流量噪声;控制柜与称重部分分开布置,减少电磁干扰。
The frame is braced against full hoppers, the weighing base sits on isolation pads so floor vibration does not become flow noise, and the cabinet is separated from the weighing section.

计量与精度 / Metering & Accuracy

称重结算不受回料堆密度变化影响,这是称重式与体积式的根本区别;体积式在回料掺比高时比例会越跑越偏。
Weight-based settlement ignores regrind bulk density, the essential difference from volumetric units that drift as reclaim share rises.

电气与安装 / Electrical & Installation

电气制式按目的国定制:220V 单相 或 380V 三相 /50Hz;出口按海运木箱包装,箱内加减振垫与防潮袋,起运港与主要目的港为雅加达、泗水。
Electrical build follows the destination: 220V single phase or 380V three phase at 50Hz. Export packing uses a wooden case with isolation pads and moisture barrier, shipped to Jakarta, Surabaya.

参数速览 / Specifications

型号 GW-450|组份 4 组(可扩 6)|单批 2~30 kg|产量 10~300 kg/h|料斗 25~50 升|驱动 步进电机 4 台|控制 触控屏 配方号调用
Model GW-450 | 4 components expandable to 6, 2-30 kg batch, 10-300 kg/h, 25-50 litre hoppers, four stepper drives

适配场景 / Applications

注塑机边的配比与配色;也用于回收料按比例掺入、色母低比例添加、功能母粒微量计量。
Proportioning and colouring on injection machine side, also regrind blending, low-share masterbatch and functional additive metering.

常见问题 / FAQ

Q:单机能单独用吗?
Q: Can it work standalone?
A:可以,单机配独立控制与料位报警,后期加线只需接信号。
Yes, with its own control and level alarms, and later line integration only needs signals.

Q:湿度大怎么防?
Q: How to handle high humidity?
A:柜内加防潮加热器、端子做防潮处理,料斗内壁防粘。
A cabinet heater, treated terminals and non-stick hopper walls handle it.

相关产品 / Related Products

称重式混料机

粤公网安备 44190002002288号