产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
光学级 PET 片材除湿干燥系统 Optical Grade PET Sheet Drying System
一、产品概述 | Product Overview

中文:光学级 PET 片材的废品往往不是挤出的问题,而是干燥的问题:水分超标引发水解降黏,料温过高引发黄变,干燥不均留下晶点。
English: Optical sheet rejects are often drying problems rather than extrusion problems: excess moisture causes hydrolytic IV drop, over-temperature causes yellowing, uneven drying leaves unmelted crystals.
中文:系统按物料工艺卡设定露点、料温与停留时间三项,并配氮气保护降低氧化风险。
English: The system sets dew point, material temperature and residence time per the process card, with nitrogen protection to reduce oxidation risk.
二、工作原理 | Working Principle
中文:除湿转轮把露点降到 -40℃~-45℃ → 热风恒温送入干燥料斗 → 料层在搅拌或慢速循环下均匀受热 → 干燥后经密闭输送直达挤出机进料口,全程不接触车间空气。
English: A desiccant rotor brings dew point to -40 °C to -45 °C → constant-temperature air enters the drying hopper → the bed is heated uniformly by agitation or slow circulation → dried material is conveyed enclosed to the extruder throat without contacting shop air.
中文:参数参考:干燥时间 4~6 小时、含水率 ≤50 ppm、料温按牌号 160~175℃。
English: Reference parameters: drying time 4-6 hours, moisture ≤50 ppm, material temperature 160-175 °C depending on grade.
三、核心优势 | Key Advantages
中文:低露点稳定输出,减少晶点与雾度波动
English: Stable low dew point reduces crystal spots and haze variation
中文:恒温料层,避免局部过热黄变
English: Uniform bed temperature prevents local overheating and yellowing
中文:氮气保护可选,保护透光率与色相
English: Optional nitrogen protection preserves transmittance and hue
中文:密闭输送,杜绝二次吸湿
English: Enclosed conveying prevents moisture re-absorption
四、适用行业 | Application
中文:光学级 PET 片材与薄膜、显示屏用膜、包装高透片材、太阳能背板膜。
English: Optical grade PET sheet and film, display film, high-clarity packaging sheet, solar backsheet film.
