产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
东莞强力粉碎机 TGC-1000 强力大口径|整件与边料破碎
东莞强力粉碎机 TGC-1000
Heavy-duty Granulator TGC-1000 for Dongguan
东莞强力粉碎机 TGC-1000(Heavy-duty Granulator TGC-1000):强力大口径机型,11 kW 电机,片刀与爪刀组合,配 Ф10 筛网,进料斗可容整件制品。
Heavy-duty Granulator TGC-1000 for Dongguan: heavy-duty wide-mouth type with an 11 kW motor, combined segmented and claw knives, 10 mm screen, and a hopper that takes whole parts
设备说明 / Equipment Overview
大口径进料斗与片刀结构,能吃整件制品、管材与型材边料;腔体厚板焊接、刀架整体加工,长时间重载下不易变形,适合集中回收与开机料处理。
A wide hopper with segmented knives takes whole parts, pipe and profile scrap. The chamber is welded from heavy plate and the knife frame machined as one piece, so it holds shape under long heavy duty and suits central reclaim and start-up lumps.
结构与控制 / Knife Frame & Control
转子为片刀加爪刀组合,动刀固定在刀架上整体拆装,定刀两片可调间隙;主电机星三角启动,配过载与缺相保护,进料口设挡料板防止料块回弹。
The rotor combines segmented and claw knives with rotating knives mounted as one serviceable frame, and two fixed knives with adjustable clearance. Star-delta starting, overload and phase-loss protection, and a baffle at the feed mouth stop kick-back.
运行与精度 / Output Size & Running Behaviour
重载破碎时电流波动大,按额定电流的 80% 控制投料节奏更稳;长条料与薄壁件混投易缠绕刀轴,加导料板或先预切,出料粒径由 Ф10 筛网控制。
Current swings widely under heavy load, so feeding at about 80% of rated current keeps it steady. Long strips mixed with thin-wall parts wrap the rotor, so add a guide plate or pre-cut; the 10 mm screen sets grain size.
操作与维护 / Knife Care & Cleaning
每班检查刀架螺栓与挡料板,重载机型一周一次;出料变粗、电流升高、机声发闷时磨刀;每月清理腔体与筛网积料,检查皮带或联轴器同轴度。
Check knife frame bolts and the baffle each shift, weekly on heavy-duty units. Regrind when output coarsens, current climbs or the sound dulls. Clear chamber and screen monthly and check belt or coupling alignment.
参数速览 / Specifications
强力大口径机型,11 kW 电机,片刀与爪刀组合,配 Ф10 筛网,进料斗可容整件制品。
heavy-duty wide-mouth type with an 11 kW motor, combined segmented and claw knives, 10 mm screen, and a hopper that takes whole parts
应用场景 / Applications
整件欠佳品、管材型材边料、挤出开机料、片材边料的集中破碎,可接输送带与集料仓组成回收线。
Central grinding of whole rejects, pipe and profile scrap, extrusion start-up lumps and sheet trim, connectable to conveyors and a collection silo as a reclaim line.
珠三角地区配套 / Local Supply in the Pearl River Delta
东莞及珠三角 3C、包装、汽配注塑与挤出企业密集,集中粉碎房与机边回收并存;订单切换快,开机料、试模件、边料数量大,对大件一次性投入能力与刀架耐用性要求高。
Dongguan and the Delta are dense with 3C, packaging and auto-parts molding and extrusion. Central grinding rooms sit alongside in-line reclaim, orders switch quickly, and start-up lumps, trial parts and trim come in volume, so wide feeding and knife durability matter.
选型与交付流程 / Sizing & Delivery
按较大单件尺寸与单班处理量定腔体与功率,给出投料方式(人工、输送带、行车吊装)与出料输送方案;到场空载试机、带料试粉碎并记录电流曲线,确认重载下不闷车。
Chamber and power follow the largest piece and throughput per shift, with a feed method (manual, conveyor or crane) and discharge plan quoted. On site we run no-load, then grind with material and record the current curve to confirm no stalling under load.
常见问题 / FAQ
Q:大件料能直接进吗?
Q: Can large parts go in directly?
A:按腔体口径与进料斗尺寸选型,超大口径件需预切或选更大机型;长条料配双层筛网或加导料板,避免缠绕刀轴。
Size on chamber and hopper opening; oversize parts need pre-cutting or a larger model. Long strips need a double screen or guide plate so they do not wrap the rotor.
Q:粉尘和噪声怎么控?
Q: How are dust and noise controlled?
A:腔体加隔音棉与密封条降低噪声,出料口接旋风分离器加脉冲除尘;定期清理风机叶轮积粉,避免二次扬尘。
Acoustic lining and sealing strips cut noise, while a cyclone with pulse-jet filter handles dust at the discharge. Clear blower impeller dust regularly to prevent secondary dust.
相关产品与内容 / Related Products
东莞 本地配套与选型提示 / Local Notes for 东莞
本地注塑、挤出与 3C 配套密集,是我司服务半径内的主力市场,本地客户多为多机台小批量,建议按机台编号建配方,售后响应快。
Local industry sets the material mix in 东莞, so sizing follows the material mix and the regrind share rather than a fixed catalogue figure; the component count and weighing range are quoted against the actual job.
对应机型与配置见站内产品页:中速机边粉碎机。
Model and configuration: 中速机边粉碎机.
