产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

Gravimetric Blender for PET/PA 结晶料称重混料机

日期:2026-11-21 06:52
浏览次数:28
摘要:Gravimetric Blender for PET/PA 结晶料 称重混料机 PET Mixing Crystallizer T3000J for China nationwide Gravimetric Blender for PET/PA 结晶料称重混料机(PET Mixing Crysta

PET搅拌结晶机 T3000J 整机 纯白底图

Gravimetric Blender for PET/PA 结晶料称重混料机
PET Mixing Crystallizer T3000J for China nationwide

Gravimetric Blender for PET/PA 结晶料称重混料机(PET Mixing Crystallizer T3000J):搅动加热让切片在罐内持续翻动,结晶均匀、不粘连,出料直接进干燥料斗。
PET Mixing Crystallizer T3000J for China nationwide: Stirred heating keeps chips moving so crystallisation stays even and free of lumps, ready for the drying hopper.

设备说明 / Equipment Overview

PET 切片直接升温干燥容易粘连结块,先做搅拌结晶把软化点提上来,后续除湿干燥与输送才顺畅。
Heating chips straight into drying makes them lump, so stirred crystallisation raises the softening point first.

结构与控制 / Structure & Control

T3000J 罐内搅拌轴变频调速,热风从罐底送入循环,切片持续翻动、避免局部过热;出料温度可控。
The T3000J drives a variable-speed shaft while hot air enters at the base and circulates, so chips keep turning and no hot spot forms; outlet temperature is controlled.

运行与精度 / Performance & Accuracy

按料位与温度双条件控制,批次结束给出提示;可与除湿干燥机、中央供料按顺序联动,结晶—干燥—输送一条线走通。
Level and temperature jointly control the batch with an end signal, and it interlocks with dryer and conveying for one continuous line.

操作与维护 / Operation & Maintenance

搅拌轴与罐体按物料磨蚀性选材,密封件耐温;再生切片含粉多时前置筛分,减少罐内积料。
Shaft and vessel materials follow abrasiveness, seals are heat-rated, and screening ahead keeps powder out when regrind is dusty.

参数速览 / Specifications

型号 T3000J|单批 300~3000 kg|加热 电加热配热风循环|搅拌 变频调速|控制 温度与料位联动
Model T3000J | 300-3000 kg per batch | Electric heating with air circulation | Variable-speed stirring | Interlocked control

应用场景 / Applications

瓶坯与片材级 PET 前处理、再生切片造粒前结晶、纺丝级切片预处理、PLA 与工程塑料改性前配料。
Bottle and sheet grade PET pre-treatment, crystallising before reclaim pelletising, spinning-grade preparation and compounding.

华南与国内配套 / Local Support in China nationwide

按客户产线与料性配型,可配合整线交付;常用件与耗材常年备货,远程与到场两种支持方式并行。
Configured to the line and material, deliverable as a package; common parts stay in stock with both remote and on-site support.

选型与交付 / Sizing & Delivery

提供物料清单与产线节拍后出具选型计算书,确认配置与产能;签约后按约定交期发运,到场安装、联动调试与操作培训,随机附手册与备件清单。
Send the material list and takt time and we return a sizing sheet confirming configuration and capacity. After order we ship on the agreed date, install, commission and train, with manual and spare list.

常见问题 / FAQ

Q:结晶和干燥能不能一步做?
Q: Can crystallising and drying be one step?
A:多数 PET 工艺要先结晶再除湿干燥;合并做容易结块,再生料含水高时更明显。
Most processes crystallise first, then dry; combining them invites lumping, especially with wet regrind.

Q:搅拌转速怎么定?
Q: How is the stirring speed set?
A:按切片规格与批量定:过低翻动不足会局部过热,过高增加粉末与磨损,建议按实际料试一次再定。
Set by chip size and batch: too slow overheats locally, too fast adds fines; fix it after one trial.

选型与验收要点 / Sizing and Acceptance Checklist

选型先定三件事:单批总重、组份数量、添加量下限。单批总重决定称量斗容积,组份数量决定机型组数,添加量下限决定要不要上微型螺杆。
Three inputs fix the model: batch weight, component count, and the smallest dosing ratio. Batch weight sets hopper volume, component count sets the frame, and the smallest ratio decides whether a micro screw is needed.

验收时看四项:零点漂移、末组补差时间、批间重量极差、换料清洁耗时。四项都在铭牌范围内再签收,比只看单批精度更稳。
Acceptance checks four items: zero drift, last-component topping-up time, batch-to-batch weight spread, and changeover cleaning time. Sign off only when all four sit inside the nameplate range.

相关机型与参数表见站内产品页:Gravimetric Blender 重力式称重混料机。
Model data sheet: Gravimetric Blender 重力式称重混料机.

相关产品 / Related Products

相关阅读 / Related Reading

称重式混料机

粤公网安备 44190002002288号