产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
Loss-in-Weight Gravimetric Feeder 失重式喂料机(单组/多组)

Loss-in-Weight Gravimetric Feeder 失重式喂料机
Loss-in-Weight Feeder TLW-100 for China nationwide
Loss-in-Weight Gravimetric Feeder 失重式喂料机(Loss-in-Weight Feeder TLW-100):称重料斗加闭环控制,按每秒失重折算瞬时流量,粉末与颗粒都能连续稳定喂入。
Loss-in-Weight Feeder TLW-100 for China nationwide: A weighed hopper with closed-loop control converts weight loss per second into instantaneous flow, feeding powder or pellets steadily.
设备说明 / Equipment Overview
料斗、称重传感器与喂料螺杆组成一个称量单元,失重速率即实际流量;补料时切到容积模式,补完自动回到称重闭环。
Hopper, load cell and auger form one weighing unit whose weight-loss rate is the actual flow; refilling switches to volumetric mode and returns to closed loop afterwards.
结构与控制 / Structure & Control
螺杆与搅拌按料性选型,粉末配防架桥搅拌,颗粒用大螺距螺杆;出料口可接气力输送或直接落料。
Screw and agitator follow the material: anti-bridging agitator for powder, wide-pitch screw for pellets, with pneumatic conveying or direct drop at the outlet.
运行与精度 / Performance & Accuracy
喂料精度按设定值的 ±0.5% 控制,配方切换时先停料再清零;多组并联可做连续配料,各组独立闭环互不干扰。
Accuracy holds within plus or minus 0.5% of set point, with recipe changes stopping feed before zeroing. Parallel units blend continuously with independent loops.
操作与维护 / Operation & Maintenance
每周校传感器零点与量程,补料阀与搅拌定期检查;粉末料每班清螺杆积料,避免结块影响失重曲线。
Verify zero and span weekly, check the refill valve and agitator, and clear screw build-up each shift on powders so the weight-loss curve stays true.
参数速览 / Specifications
型号 TLW-100|喂料 1~100 kg/h|精度 ±0.5%|螺杆或皮带可选|控制 失重式闭环
Model TLW-100 | 1-100 kg/h | Accuracy plus or minus 0.5% | Screw or belt | Loss-in-weight closed loop
应用场景 / Applications
挤出与注塑的色母与助剂微量添加、改性造粒连续配料、粉体与片状料定量喂入、实验室小流量试验。
Micro-dosing masterbatch and additives, continuous compounding, metered powder and flake feed, and low-flow laboratory trials.
华南与国内配套 / Local Support in China nationwide
按客户产线与料性配型,可配合整线交付;常用件与耗材常年备货,远程与到场两种支持方式并行。
Configured to the line and material, deliverable as a package; common parts stay in stock with both remote and on-site support.
3D 打印耗材挤出配比 / Dosing for 3D Printing Filament
3D 打印线材(PLA、PETG、ABS、TPU)对线径与色差敏感,配比端要的是稳定而非流量:1.75 mm 下线径 ±0.03 mm 的跳动,源头多在配比漂移而不在模头。把新料、色母、增韧剂、抗静电剂分开称量,单组误差不叠加,线径曲线才平;TPU 软料则要压低回料、减小剪切,单组失重式喂料比整机混料更稳。
Filament tolerances follow dosing stability rather than throughput: at 1.75 mm a plus or minus 0.03 mm swing usually starts at the blender, not the die. Weighing virgin, masterbatch, impact modifier and antistatic apart keeps errors from stacking, while soft TPU wants low regrind and gentle shear, where a single loss-in-weight feeder beats a full blender.
六组份喂料节拍 / Six-component Feed Timing
六组份的价值在每组独立闭环,不在组数多:任一组波动不牵动其余五组。先按单批重量与循环周期定组数,堆得过多反拖响应;耗材线与彩拉线常配成「三基料 + 色母 + 增韧 + 抗静电」,换产品改配方不动机械。
Six components pay off through independent loops rather than the count: one drift leaves the other five untouched. Size on batch weight and cycle time first, since too many loops slow the response; filament and rainbow lines usually run three base resins plus masterbatch, impact modifier and antistatic, so product changes stay on the recipe screen.
选型与交付 / Sizing & Delivery
提供物料清单与产线节拍后出具选型计算书,确认配置与产能;签约后按约定交期发运,到场安装、联动调试与操作培训,随机附手册与备件清单。
Send the material list and takt time and we return a sizing sheet confirming configuration and capacity. After order we ship on the agreed date, install, commission and train, with manual and spare list.
常见问题 / FAQ
Q:失重式和容积式差别在哪?
Q: Loss-in-weight versus volumetric?
A:容积式按螺杆转速折算,料性变化就漂;失重式按实际失重结算,并可自动补偿,长期运行精度更稳。
Volumetric estimates from screw speed and drifts with material; loss-in-weight settles on actual weight loss and compensates, holding accuracy long term.
Q:补料时精度会不会掉?
Q: Does accuracy drop during refill?
A:会有一小段容积模式,靠补料频率与料斗容量控制影响;把补料点设在料斗 60%~70% 处比见底再补更稳。
A short volumetric window exists during refill; triggering it at 60-70% hopper level is steadier than refilling near empty.
选型与验收要点 / Sizing and Acceptance Checklist
选型先定三件事:单批总重、组份数量、添加量下限。单批总重决定称量斗容积,组份数量决定机型组数,添加量下限决定要不要上微型螺杆。
相关阅读 / Related Reading
- Loss-in-Weight Gravimetric Feeder 微量失重式称重喂料机 TLW-50
- Loss-in-Weight Gravimetric Feeder 失重式重量喂料机
- Loss‑in‑Weight Feeder(LIW)失重式喂料机|连续失重给料机
- Loss-in-weight Feeder 失重式喂料机 TLW-100
