产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
DDL-400 输配电控制设备用工程塑料干燥机 400公斤每小时 江苏扬州
适用场景|Application
输配电及控制设备中的绝缘件、壳体多采用工程塑料与环氧体系,注塑或浇注前含水率偏高会带来气泡与尺寸偏差。400公斤每小时适配中型注塑与浇注线。
Insulating parts and housings in transmission, distribution and control equipment use engineering plastics and epoxy systems; excess moisture before moulding or casting brings bubbles and dimensional drift. At 400 kg per hour it suits mid-size moulding and casting lines.
结构与运行|Construction and operation
料斗保温并带视窗,除湿机柜双塔交替送风;温度按树脂体系设定,超温报警联动机台停机信号。
The insulated hopper has a sight window and the cabinet alternates twin towers; temperature follows the resin system and over-temperature alarm can be tied to a machine stop signal.
选型要点|Selection notes
按注塑机吨位与单件重量核算小时用量;环氧浇注体系建议配恒温箱而非料斗干燥。
Size from machine tonnage and part weight; for epoxy casting systems a constant-temperature chamber is a better fit than hopper drying.
相关供货信息:PET长丝纺丝深度除湿干燥系统 TPD-1000 江苏吴江 PET结晶除湿干燥机 900公斤每小时 江苏海安 低烟无卤护套料除湿干燥机 450公斤每小时 广东东莞
