产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

双塔转轮除湿干燥机 DT-600 广东东莞

日期:2026-11-21 05:33
浏览次数:8
摘要:双塔交替吸附再生的转轮除湿干燥机,连续送风,露点稳定。

双塔转轮除湿干燥机 DT-600 广东东莞

产品定位|Positioning

DT-600 为双塔结构的转轮除湿干燥机,两座蜂巢转轮交替承担吸附与再生,送风连续不中断。适用于对露点连续性要求高的注塑、挤出与纺丝配套场景。

DT-600 is a twin-tower desiccant-rotor drying unit in which two honeycomb wheels alternate between adsorption and regeneration so supply air never stops. It suits injection moulding, extrusion and spinning support duties where a continuous dew point matters.

运行说明|Operation

吸附塔送出干燥空气,再生塔以加热空气脱附水分,切换由时序阀控制,两塔之间留有小段重叠时间,保证切换瞬间不出现露点跳变。转轮前段设过滤,减少粉尘对蜂巢孔的堵塞。

One tower delivers dry air while the other is heated to desorb moisture; sequence valves control the changeover with a short overlap so the dew point does not jump at the switch. Pre-filters ahead of the wheels keep dust from blocking the honeycomb passages.

选型与维护|Selection and upkeep

按需要的送风量与目标露点选定机型,600公斤每小时的干燥能力适配中型注塑与挤出线。转轮属耗材,建议按运行小时记录并定期检查密封条与传动带,避免漏风影响露点。

Model selection follows required air flow and target dew point; 600 kg per hour of drying capacity fits mid-size moulding and extrusion lines. The wheels are consumables, so log running hours and inspect seals and drive belts periodically to keep leakage from spoiling the dew point.

相关供货信息:双塔除湿干燥机 DT-500 江苏苏州 双塔除湿干燥机 DT-1000 浙江嘉兴 双塔氮气除湿干燥机 DT-800 广东佛山

粤公网安备 44190002002288号