产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
复合短纤维切片结晶干燥线 TPD-1400 江苏仪征
适用场景|Application
复合短纤维多为双组份结构,两种切片熔点与干燥要求不同。TPD-1400 以1400公斤每小时配置两条独立风路,按各自牌号设定温度,避免一种料被迫迁就另一种。
Composite staple is usually bicomponent, and the two chip types differ in melting point and drying requirement. TPD-1400 runs two independent air paths at 1400 kg per hour so each grade keeps its own set point instead of one being forced to follow the other.
结构与运行|Construction
结晶段与除湿段分开布置,中间设缓冲料斗;除湿采用双塔交替吸附再生,送风连续;两路出料可汇入同一输送管,按比例进入纺丝位。
Crystallizing and drying sections sit apart with a buffer hopper between them; drying alternates twin towers for continuous supply air; the two discharges can merge into one conveying line and enter spinning positions by ratio.
选型要点|Selection notes
按两组份比例与总用量核算,比例差距大的场合建议两路独立计量;出料含水率按组份分别抽检,记录分开留档。
Size from the two component ratios and total demand; where the ratio is very uneven, meter each path separately; sample residual moisture per component and keep the records apart.
相关供货信息:PET短纤拉丝结晶干燥线 TPD-1500 江苏江阴 涤纶短纤结晶除湿干燥线 TPD-1500 浙江萧山 PET纺丝切片深度除湿干燥系统 TPD-1600 江苏盛泽
