产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
TPD-500 PET结晶除湿干燥机 500公斤每小时 河南新乡
应用场景|Application
河南新乡 再生PET瓶片造粒,处理量500公斤每小时。再生料含水与杂质波动大,前段设除尘与除铁,干燥段停留时间可按料源调整,适应片料与切片混用。
Capacity 500 kg per hour. Pre-crystallization protects the chips from caking, the twin-tower drying section keeps air flowing without a regeneration pause, and an optional gravimetric blender proportions regrind on the conveying side.
结构与运行|Construction and operation
设备分结晶段、除湿段与输送段:结晶段以热风循环完成预结晶,防止切片在高温下结块;除湿段采用双塔结构,送风连续;输送段可选配称重式混料,按比例配入回料。
Three sections make up the unit: hot-air circulation pre-crystallizes the chips so they will not cake at high temperature, twin towers keep supply air continuous in the drying section, and an optional gravimetric blender proportions regrind on the conveying side.
选型要点|Selection notes
按产线小时用量与纺丝位数选型,出料含水率按批次抽检并留档;再生料比例高的场合需在前段加除尘与除铁,减少杂质对露点与风路的影响。
Size from hourly line consumption and spinning position count, and sample residual moisture per batch with records kept; where regrind share is high, add dedusting and magnetic separation upstream to keep impurities out of the air path.
