产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
DT-600 光纤预制棒与拉丝车间低湿除湿机组 600公斤每小时 江苏吴江
适用场景|Application
预制棒沉积、烧结与拉丝工序对车间湿度敏感,环境露点偏高会影响粉尘沉降与设备结露。600公斤每小时档的除湿机组用于车间补风与局部低湿区控制。
Preform deposition, sintering and drawing are sensitive to shop humidity; a high ambient dew point affects dust settling and causes condensation on equipment. The 600 kg per hour class unit serves make-up air and local low-humidity zones.
结构与运行|Construction and operation
两座蜂巢转轮交替吸附与再生,送风连续;机组配初效与中效过滤,减少粉尘对转轮的堵塞;送风口可按区域分支。
Two honeycomb wheels alternate adsorption and regeneration for continuous supply air; primary and medium filters protect the wheels from dust, and supply outlets can branch by zone.
选型要点|Selection notes
按车间体积、换气次数与目标露点核算送风量;预制棒洁净区建议与新风机组联动,避免除湿段成为粉尘入口。
Size air volume from room volume, air changes and target dew point; in preform clean areas link the unit with the make-up air handler so the dehumidifying section does not become a dust entry.
相关供货信息:双塔除湿干燥机 DT-500 江苏苏州 双塔氮气除湿干燥机 DT-800 广东佛山 双塔转轮除湿干燥机 DT-600 广东东莞
