产品中心
PRODUCT CENTER
- 联系人 : 曹镜森先生
- 联系电话 : 0769-82226193
- 传真 : 0769-82226193
- 移动电话 : 13925217478
- 地址 : ** 广东省东莞市大朗镇仙村工业区
- Email : caojingshen@126.com
- 邮编 : 523792
- 公司网址 : http://www.szdatian.net.cn
- MSN : caoshingcer@126.com
- QQ : 454992321
DT-200 双塔除湿干燥机 200公斤每小时 广东东莞
应用场景|Application
广东东莞 小批量多品种注塑,处理量200公斤每小时。整机带脚轮,可在机台间移动使用,换料前先降温清料,避免残留料结块。
Capacity 200 kg per hour. Two honeycomb wheels alternate so supply air never stops, and a short overlap at changeover keeps the dew-point curve flat for moulding and extrusion duties.
结构与运行|Construction and operation
两座蜂巢转轮交替承担吸附与再生,送风连续不中断;切换时留有小段重叠时间,保证露点曲线平直;转轮前设过滤,减少粉尘堵塞蜂巢孔。
Two honeycomb wheels alternate adsorption and regeneration so supply air never stops; a short overlap at changeover keeps the dew-point curve flat; pre-filters ahead of the wheels stop dust from blocking the honeycomb passages.
选型要点|Selection notes
按车间总用气量与机台数量核算,再留换料与峰值余量;机台分散时建议与集中供料并线,干燥后物料走密闭管路直送,减少敞口吸潮。
Size from total shop air demand and machine count with margin for grade changes and peaks; where machines are spread out, run it alongside central conveying so dried material travels in closed lines instead of open containers.
