产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

丙纶纺丝结晶干燥机 TPD-600 江苏常熟

日期:2026-11-20 19:12
浏览次数:0
摘要:丙纶切片纺丝前结晶与干燥,低温大风量,适配粗旦与细旦两条线。

丙纶纺丝结晶干燥机 TPD-600 江苏常熟

产品定位|Positioning

丙纶熔点低、热稳定性一般,干燥环节要控制温度上限,靠风量与停留时间完成脱水。TPD-600 以低温大风量设计,适配常熟一带丙纶纺丝的粗旦与细旦产线。

Polypropylene has a low melting point and modest thermal stability, so drying must cap the temperature and rely on air flow and residence time instead. TPD-600 is built for low temperature and high air volume, fitting both coarse and fine denier PP spinning lines around Changshu.

结构说明|Construction

料斗带搅拌桨与保温层,防止切片在低温下架桥;风路分送风与回风两段,回风经除尘后循环使用,减少热量损失;控制柜提供超温与风机故障报警。

The hopper carries an agitator and insulation to stop chips bridging at low temperature; the air path splits into supply and return, with return air dedusted and recirculated to cut heat loss; the control cabinet alarms on over-temperature and fan faults.

相关供货信息:PET拉丝干燥系统 涤纶短纤结晶除湿干燥线 TPD-1500 浙江萧山

粤公网安备 44190002002288号