运用自动投粉系统

运用自动投粉系统是专为化工行业设计的，不仅能提高生产效率还节约了设备成本，与单机上料相比，更具应用优势。

如何运用自动投粉系统这是一个非常重要的问题，根据料量剂的反馈来给定量器的脉冲流量信号，当料量累计达到一定的数值之后，记理器制仪会给电磁阀们或者是泵一个开关的吸纳好，

从而达到对阀门、泵的启动和关闭的控制，这样才能实现假聊的手动控制好人自动化，

自动投粉系统精度高，操作起来简单方便，非常容易实现，

关于运用自动投粉系统的定量问题，达安泰机械小编给大家介绍一下：

启动键：运用自动投粉系统每次操作完成之后，按此键可以将定量值清零，重新开始下一批的操作。
运用自动投粉系统停止键：中央供料系统若是遇到紧急的情况，可按此键停止阀门。
定量自动投粉系统计量器：

可以任意的设置所需要的加入料的量，计量器控制仪具开关量信号的输出，

当设定好定量值后，记理器制仪会给电磁阀们或者是泵的一个开关信号，

当达到设定的数值之后，自动关闭泵或者阀门。带有瞬时的流量，累计流量，

运用自动投粉系统中加入量显示的功能控制仪带有面板清零的装置。

运用自动投粉系统恢复按键：记载突然断电或者是其他原因造成的定量控制中途停止时，按恢复键就可以继续的加入未完成的定量值中。


工业发展迅速，企业对于设备生产效率要求也更高，成型机的供料也趋向自动化、智能化和人性化控制，供料主要分为中央供料系统及单机上料方式，而目前企业使用*多的则是自动投粉系统，更能满足企业的生产要求。
The use of automatic powder system is designed for the chemical industry, not only can improve production efficiency also saves the cost of equipment, compared with the single machine, more application advantages.
The use of automatic powder system
How to use the automatic powder system This is a very important issue, according to the amount of material feedback to the quantizer pulse flow signal, when the material reaches a certain value, the instrument system will give the solenoid valve or Is a pump to absorb a good,

So as to achieve the valve, the pump start and shut down the control, so as to achieve a false control of the manual control of good people automation,

The use of automatic powder system, high precision, easy to operate, very easy to achieve,

On the use of automatic powder system of quantitative problems, Da Aetai mechanical Xiaobian to tell you about:

Start key: use the automatic powder system After each operation is completed, press this key to clear the value, restart the next batch of operations.
Use the automatic puffing system stop key: If the central feeding system encounters an emergency situation, press this key to stop the valve.
Quantitative automatic powder system meter:

Can be set arbitrarily set the amount of the required material, the meter control instrument switch signal output,

When set the quantitative value, the instrument system will give the solenoid valve or a pump switch signal,

When the set value is reached, the pump or valve is automatically closed. With instantaneous traffic, cumulative traffic,

The use of automatic powder system to add the amount of display function of the controller with a panel clear device.

The use of automatic powder system to restore the button: record a sudden power failure or other reasons caused by the quantitative control stop halfway, press the resume button can continue to join the unfinished quantitative value.


Industrial development is rapid, the enterprise for the equipment production efficiency requirements are higher, the molding machine for the material also tends to automation, intelligent and human control, feed is divided into the central feeding system and stand-alone feeding method, and the current business use the most Is the automatic powder system, more to meet the production requirements of enterprises.