点击这里给我发消息  点击这里给我发消息
   imgAlibaba

注塑挤出成型中央供料系统


注塑挤出成型中央供料系统特點:
1、節省人工成本和原料成本,使用年限長達10年以上;
2、原料集中管理,避免浪費及污染現象;
3、保持工廠環境整潔,維系環境體系;
4、有利保持品質穩定,提高產值,維系質量體系;
5、有利於提高公司形象,贏得客户好評與合作。

注塑挤出成型中央供料系统
專業設計中央供料系統,注塑周邊整廠規劃。全自動化設計根據貴公司的規模制定*佳方案;為貴司創造價值宗旨:高產值!高利潤!高效率!


注塑挤出成型中央供料系统原料现场:
原料集中除湿干燥,可节省用电量及烘料时间。
原料专人负责管理,减少浪费,降低生产成本。
设立原料快速选料站,提高生产效率。
可适用于多种原料之弹性生产模式。
产能及良品率提高且稳定。

注塑挤出成型中央供料系统生产现场:
整厂自动化设计,将原料及干燥料筒与现场彻底分开管理,节省空间。
现场作业环境清洁美观,没有热源,提升环境质量,降低人员流动率。
客户参观时有助提升企业整体形象,获得良好印象,从而增加订单。


注塑挤出成型中央供料系统設計流程:原料→儲存→計量→幹燥→輸送→使用
注塑挤出成型中央供料系统采用一臺機一根管,密封式回路設計方式,保證整個系統?行穩定,絕無塑膠回潮、堵料現象發生。它配合中央幹燥機(除濕機)系統使用,可使幹燥空氣對原料進行再次幹燥,防止幹燥後的塑膠回潮,同時在每個輸送循環後對輸送管進行清理,確保管道內没有殘料。在避免原料回潮的同時也保證加入注塑機中原料一致性,在真空負壓同進作用下,原料中原有的粉塵經過過濾器(集塵器)系統濾出,有利提高產品質量。
注塑挤出成型中央供料系统料控制器:
采用日本MTSUBISH可编程控制器,人机接口使用日本FUJI7.7寸触控式彩色液晶显示屏幕,人性化沟通画面,内建中英文操作说明书,故障排除方法及电路图。本系统可控制12个吸料站,可扩展为24站。
根据辅料信号送达PLC的先后顺序进行辅料,并显示等待顺序。
具备密码保护功能,利于现场主管人员管理。
原料选料系统配合选料站可个别设定不同的原料。
越来越多的现代化注塑工厂正在使用拓斯达中央供料系统。
 
 为什么选择达安泰注塑挤出成型中央供料系统?
◆实现全厂加料无人化作业,为企业节省大量人力。
◆配合冷却水循环系统,自动取出传送系统,冷热交换系统和次料回收系统,实现全厂无人化作业,企业可以节省用于空调和电灯等设备所消耗的能源。
◆极大的提高企业的生产效率,降低企业的生产成本。
◆极大的提高产品的品质,降低**率。
◆可以根据需要调整不同的原料,为企业省去很多换料的麻烦。
◆管路不占据地面空间,为企业节省大量的有效空间。
◆走管和摆放美观,可以有效改善生产车间的环境。
◆费用相对低廉,长远看为企业节省大量资金。

◆实现封闭管路输送原料,彻底避免对车间的噪音,粉尘,热气污染,是*大限度提高产品质量的*佳系统。

Injection Molding Central Feeding System Features:
1, save labor costs and raw material costs, the use of life for more than 10 years;
2, centralized management of raw materials to avoid waste and pollution;
3, to keep the factory environment clean and maintain the environment system;
4, favorable to maintain quality and stability, increase output value, maintain the quality system;
5, is conducive to improving the company's image, to win customers praise and cooperation.

Injection Molding Outlet Central Feeding System
Professional design central feeding system, injection of the whole plant around the planning. Fully automated design according to the size of your company to develop the best program for your company to create value for the purpose: high yield! High profit! high efficiency!



Injection Molding Central Feeding System Raw Material Site:
Raw material centralized dehumidification drying, can save electricity and drying time.
Raw materials are responsible for management, reduce waste, reduce production costs.
The establishment of raw materials rapid selection of materials, improve production efficiency.
Can be applied to a variety of raw materials, flexible production model.
Production capacity and yield improved and stable.


Injection Molding Central Feeding System Production Site:
The whole plant automation design, the raw materials and drying barrels and the scene completely separate management, saving space.
On-site operating environment clean and beautiful, no heat, improve environmental quality, reduce staff turnover rate.
Customers visit to help enhance the overall image of the enterprise, get a good impression, thereby increasing the order.



Injection Molding Central Feeding System Design Process: Raw Material → Storage → Metering → Drying → Transportation → Use
Injection molding Central feeding system using a machine a tube, sealed circuit design, to ensure the stability of the entire system, no plastic resurgence, blocking material phenomenon occurs. It is used in conjunction with a central dryer (dehumidifier) system to allow dry air to dry the raw material again, prevent moisture from resurfacing, and clean the pipe after each conveyance cycle to ensure that there is no residue in the pipe. In order to avoid the return of raw materials, but also to ensure that the injection molding machine to join the consistency of raw materials in the vacuum negative pressure with the role of the original raw materials through the filter (dust collector) system filter out, favorable to improve product quality.
Injection Molding Central Feeding System Material Controller:
Using Japan MTSUBISH programmable controller, man-machine interface using Japan FUJI7.7-inch touch-color LCD screen, user-friendly communication screen, built-in Chinese and English operating instructions, troubleshooting methods and circuit. The system can control 12 suction stations, can be expanded to 24 stations.
According to the auxiliary signal sent to the PLC order of the auxiliary materials, and display the waiting order.
With password protection, which is conducive to on-site management personnel.
Raw material selection system with the election material station can be individually set different raw materials.
More and more modern injection molding plants are using the Tuo Sida central feeding system.
 
 Why choose D & amp; E injection molding central feeding system?
◆ to achieve the whole plant feeding unmanned operations for enterprises to save a lot of manpower.
◆ With the cooling water circulation system, automatically remove the transmission system, hot and cold exchange system and sub-material recovery system to achieve the whole plant unmanned operations, enterprises can save for air conditioning and lighting equipment and other energy consumption.
◆ greatly improve the production efficiency of enterprises, reduce production costs.
◆ greatly improve the quality of the product, reduce the non-performing rate.
◆ can be adjusted according to the needs of different raw materials for enterprises to save a lot of trouble.
◆ pipeline does not occupy the ground space for enterprises to save a lot of effective space.
◆ walking and placed beautiful, can effectively improve the production workshop environment.
◆ the cost is relatively low, long-term view for the enterprise to save a lot of money.
◆ to achieve closed pipeline transport of raw materials, to completely avoid the noise of the workshop, dust, hot air pollution, is to maximize the best product quality system.

img41
东莞市天天自动化设备有限公司
电话:0769-82226193   传真:0769-82226193
地址:** 广东省东莞市大朗镇仙村仙一区99号  邮编:523792
粤ICP备17164225号
 
img45

粤公网安备 44190002002288号