产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

双组份复合短纤维除湿干燥系统 DDL-900 浙江富阳

日期:2026-11-20 17:48
浏览次数:0
摘要:双组份共900公斤每小时除湿,两路露点独立可控。

双组份复合短纤维除湿干燥系统 DDL-900 浙江富阳

适用场景|Application

低熔点组份对温度敏感,高温易粘连;高熔点组份则需要更长停留。DDL-900 把两路风量与温度独立设定,共用一台除湿主机,按富阳一带复合短纤车间布置。

The low-melting component is heat sensitive and tends to stick, while the higher-melting one needs a longer residence. DDL-900 sets air volume and temperature separately for each path from one shared dehumidifier, laid out for the composite staple shops around Fuyang.

运行说明|Operation

主机双塔交替,出风分两路,各自经温度调节后送入料斗;两路露点在面板上分别显示,任一路偏离设定值时单独报警,便于快速定位。

The cabinet alternates twin towers and splits its outlet into two paths, each temperature-conditioned before entering its hopper; both dew points read separately on the panel and either path alarms on its own, which makes locating a fault quick.

维护要点|Upkeep

低熔点料斗的保温层需定期检查,避免外壁散热造成局部冷凝;切换阀密封每季度检查,两路不同步时优先查阀件。

Inspect the low-melting hopper insulation regularly so heat loss does not cause local condensation; check changeover valve seals quarterly and look at the valves first when the two paths drift apart.

相关供货信息:纺丝结晶除湿干燥系统 TPD-1200 浙江绍兴 PET纺丝在线结晶干燥机组 TPD-800 浙江绍兴 深度除湿干燥机 DDL-180 河北保定

粤公网安备 44190002002288号