产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

宁波中央供料系统 TCC-12

日期:2026-11-21 05:13
浏览次数:40
摘要:宁波 中央供料系统 TCC-12 Central Material Conveying TCC-8 for Ningbo 宁波中央供料系统 TCC-12(Central Material Conveying TCC-8):一台风机带八个料位,干燥、输送、分配集中控制,车间不再满地料管与移动干燥机。

中央供料系统 TCC-8 整机 纯白底图

宁波中央供料系统 TCC-12
Central Material Conveying TCC-8 for Ningbo

宁波中央供料系统 TCC-12(Central Material Conveying TCC-8):一台风机带八个料位,干燥、输送、分配集中控制,车间不再满地料管与移动干燥机。
Central Material Conveying TCC-8 for Ningbo: One blower serves eight stations with central drying, conveying and distribution, clearing the floor of hoses and portable dryers.

设备说明 / Equipment Overview

负压输送加分配站,料从干燥料斗经管路到机台小料斗;管路按机台位置分区,切换料号靠分配阀。
Vacuum conveying feeds a distribution station, moving material from the drying hopper to machine hoppers; zoning by machine position and selector valves handle changes.

结构与控制 / Structure & Control

风机、过滤器与分配站集中布置,管路用耐磨弯头;每台机台小料斗带料位开关,缺料自动补。
Blower, filter and distribution station sit together with wear-resistant elbows, and each machine hopper has a level switch that triggers refill.

运行与精度 / Performance & Accuracy

按机台数量与很远距离选风机功率,管路越长压损越大;分区运行可只给在用机台供料,减少空转。
Blower power follows station count and the longest run since pressure loss grows with distance, and zone control feeds only machines in use.

操作与维护 / Operation & Maintenance

每周清过滤器与分配站,每月查管路接头与弯头磨损;料号切换时先吹扫管路,避免混料。
Clean filters and the distribution station weekly, inspect joints and elbows monthly, and purge the line on material change to prevent mixing.

参数速览 / Specifications

型号 TCC-8|料位 8 个(可扩)|输送距离 300~800 m|风机 7.5~11 kW|控制 PLC 加触摸屏
Model TCC-8 | 8 stations (expandable) | 300-800 m conveying | 7.5-11 kW blower | PLC with touch panel

应用场景 / Applications

多机台注塑车间集中供料、挤出与吹膜线料仓分配、干燥与输送联动、再生料与色母分区配送。
Central feed for multi-machine molding shops, silo distribution on extrusion and film lines, drying and conveying interlocked, and zoned delivery of regrind and masterbatch.

宁波配套 / Local Support in Ningbo

家电、汽配、文具与日用品注塑集群,模具副数多、换模频繁,常按多模共用配置。
Appliance, auto parts, stationery and household goods cluster here with many molds and frequent changes, often sharing one unit across molds.

选型与交付 / Sizing & Delivery

提供物料清单与产线节拍后出具选型计算书,确认配置与产能;签约后按约定交期发运,到场安装、联动调试与操作培训,随机附手册与备件清单。
Send the material list and takt time and we return a sizing sheet confirming configuration and capacity. After order we ship on the agreed date, install, commission and train, with manual and spare list.

常见问题 / FAQ

Q:管路长了会不会送不动?
Q: Will a long run fail to convey?
A:按很远机台选风机,超长段做二次接力;弯头多、料性轻的场合要加风速,建议先做一段实测再定管径。
Size the blower on the furthest machine and relay on very long runs; light material and many elbows need higher air speed, so test one section before fixing diameter.

Q:混料风险怎么控制?
Q: How is cross-contamination controlled?
A:一路一料、切换时吹扫,分配阀做互锁;色母与本色分区走管,别共用同一支管。
One material per line with a purge on change and interlocked valves; keep masterbatch and natural on separate branches.

宁波 本地配套与选型提示 / Local Notes for 宁波

余姚、慈溪一带家电与汽配集中,模具配套成熟,家电件颜色多、批量中等,配方号与色号分开管理,换色只清下料口。
Local industry sets the material mix in 宁波, so sizing follows the material mix and the regrind share rather than a fixed catalogue figure; the component count and weighing range are quoted against the actual job.

对应机型与配置见站内产品页:中央供料系统。
Model and configuration: 中央供料系统.

相关产品 / Related Products

相关阅读 / Related Reading

粤公网安备 44190002002288号