所在位置: 首页> 技术文章> 技术咨询>

产品中心
PRODUCT CENTER

  • 联系人 : 曹镜森先生
  • 联系电话 : 0769-82226193
  • 传真 : 0769-82226193
  • 移动电话 : 13925217478
  • 地址 : ** 广东省东莞市大朗镇仙村工业区
  • Email : caojingshen@126.com
  • 邮编 : 523792
  • 公司网址 : http://www.szdatian.net.cn
  • MSN : caoshingcer@126.com
  • QQ : 454992321
文章详情

应变式称重传感器Strain Gauge Load Cell

日期:2026-11-19 21:02
浏览次数:604
摘要:应变式称重传感器,梁式称重传感器,注塑称重传感器,梁式称重传感器 技术要点 / Technical Points 应变式称重传感器(Strain Gauge Load Cell)靠粘贴在弹性体上的应变片测量重量:受力后弹性体微变形,应变片电阻随之变化,通过惠斯通电桥输出电压信号,再经放大器转为重量读

应变式称重传感器,梁式称重传感器,注塑称重传感器,梁式称重传感器

称重式混料机 Gravimetric Blender

技术要点 / Technical Points

应变式称重传感器(Strain Gauge Load Cell)靠粘贴在弹性体上的应变片测量重量:受力后弹性体微变形,应变片电阻随之变化,通过惠斯通电桥输出电压信号,再经放大器转为重量读数。选型看三个参数:量程、精度等级(C3 为常规商用级)、以及防护等级(粉尘环境要 IP65 以上)。

A strain gauge load cell measures weight through strain gauges bonded to an elastic body: load deforms the body slightly, changing gauge resistance, which the Wheatstone bridge converts to a voltage read as weight after amplification. Select on three parameters: capacity, accuracy class with C3 as the standard commercial grade, and protection rating of IP65 or better in dusty environments.

称重混料的计量原理 / Weighing and Blending Principle

精度指标看单次称重的重复性,常规机型在正负 0.3% 到 0.5%。影响精度的三个因素:称重传感器量程与配方比例不匹配(小比例组分用大量程传感器,误差占比大)、计量螺杆下料脉动、称重斗余料未清零。小比例色母(1% 以下)建议用独立小量程色母机。

Accuracy is the repeatability of a single weigh, typically plus or minus 0.3 to 0.5 percent. Three factors affect it: a load cell range mismatched to the recipe ratio, where a small component weighed on a large-range cell carries a big relative error; screw feed pulsation; and residual material in the weigh hopper not tared. For masterbatch below 1 percent, use a separate small-range doser.

称重式混料机按配方逐组分称重后混合,不是按体积比例。每个组分经各自的计量螺杆落到称重斗,称到设定值后停止,全部称完后开混合阀进入搅拌腔。分组称重的好处是换配方只需改设定值,不受物料比重变化影响;体积式混料机在比重变化时会直接偏料。

A gravimetric blender weighs each component by recipe rather than proportioning by volume. Each component is fed by its own metering screw into the weigh hopper and stops at setpoint; after all components are weighed, the mix valve opens into the blending chamber. Weighing each component means a recipe change is only a setpoint change and bulk density variation does not shift the ratio, unlike volumetric blenders.

相关产品 / Related Products

相关阅读 / Related Reading

称重式混料机

下一篇: 拉式称重模块
上一篇: 台秤式螺旋失重秤

粤公网安备 44190002002288号